SALAMANDER DESIGNS LIMITED WARRANTY
Salamander Designs Ltd. (Salamander) provides
the following Limited Warranty. The Limited
Warranties herein described for the specific products
listed below shall be in lieu of any other warranty,
expressed or implied, including but not limited to
any implied warranty of merchantability or fitness for
a particular use. These Limited Warranties do not
cover damages incurred in shipment, failures caused
by other products not supplied by Salamander, or
failures due to accident, misuse, abuse or alteration
of the product. Salamander’s sole liability and the
purchaser’s exclusive remedy shall be for the repair,
or at Salamander’s option, for the replacement of the
defective part as provided herein. Notwithstanding
the above, if replacement parts for defective
materials are not available, Salamander reserves
the right to make reasonable compensation in lieu
of repair or replacement. Liability for incidental
or consequential damages under the warranty is
excluded. Some states do not allow limitation of
incidental or consequential damages. Therefore, the
above limitation may not apply in certain instances.
Defective product must be given Return Authorization
by Salamander and is to be returned to the factory
prepaid, in the original carton and packing materials.
Any damage incurred in a shipment not in original
packing shall be the responsibility of the owner.
Warranty repairs will be returned to the owner
prepaid, within the continental U.S.A. only. This
warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
Salamander provides a five (5) year Limited Warranty
from the date of the purchase, on material damage
and/or manufacturing defects. Salamander
guarantees that if, during the warranty period,
any defects should occur in the product resulting
from faulty material and/or assembly, as assessed
by Salamander, the product will be repaired or, if
necessary, replaced free of charge. The warranty
expressly does not apply to normal wear and tear that
becomes apparent after normal use.
During mounting of the product, instructions for the
installation and use of the television must be followed
precisely. Correct mounting is essential. For maximum
weights, screen size and correct application, please
refer to the product installation instructions. Failure
to comply with these requirements or the occurrence
of any of the following circumstances will result in
the termination of any otherwise applicable Limited
Warranty:
a.
If the holes in the wall required for the
installation of the product were not
drilled in accordance with the instructions
for use of the product, or if the product
was not properly installed or used.
b.
If you (or third parties) – without
Salamander’s or your Salamander
dealer’s prior knowledge and
permission – carried out work or repairs
on the product.
c.
If a defect is the result of external causes, i.e.
in the case of abnormal types of damage
caused by climatological, thermal, mechanical
or other external influences.
d.
If the product is not used in accordance
with its intended use or if it is damaged as
a result of negligence.
©2008 Salamander Designs Ltd.
Doc #503-012 v4.08
