TIP:
You may need to wiggle the rear panel to set it into place.
TIP:
If you have a TV Mount, install it before securing the Top.
4
Install Door Pulls
5
Rear Panels
Fine Tuning/Tips
Secure pulls with screws
using a Phillips screwdriver.
Locate the rear post channels.
Lead one end of the rear panel into a
post channel.
Compress the rear panel firmly into
the opposing post channel.
Aligning Doors
Infinitely Adjustable Shelves
Assemble loosely as shown.
Insert into post channel and slide to desired height.
Level shelf by adjusting shelf peg positions and
tighten screw using hex key.
Note: Drop-in nut must make a 1/4 turn in post.
Main Adjustment (Side to Side and Up/Down)
Adjustment is made by turning screw (A) in and out.
Dismount Hinge from Hinge Plate
With one hand holding the door open, pull
back on the hinge quick-release lever (B).
Follow these instructions if you wish to adjust your doors.
Socket Screw 3/4’’
(300-465)
Shelf Peg
Drop-In Nut
(300-565)
Door Front
Adjust the tops of the doors to be
parallel to the top of the cabinet.
A
A
B
C
A
A
B
B
3
Place & Secure Top
Place Rubber Pads (303-380) on the frame covering bolts as shown.
Glass Top
Place the glass top
squarely on the cabinet
with the Salamander Logo
positioned to the back/left
corner.
Wood Top
Align wood top squarely to the cabinet
frame with the holes closest to edge of
top, positioned to the rear of cabinet.
Fasten top to the frame using screws (303-520).
A
B
A
B
(Applicable Models Only)
