Sakura SXAO-110HAS Installation And Service Manual Download Page 24

Page: 24 / 31

selected action number.

10 Use the

button to set the correct action ON time, meantime the icon

is appeared.

Press the

button and then press the

button to set the hour (from 00:00 to 23:00).

Press the

button and then press the

button to set the minute (from 00 to 50, interval 10

minutes).

Press the

button to save the setting.

11 Use the

button to set the correct action OFF time, meantime the icon

is appeared.

Press the

button and then press the

button to set the hour (from 00:00 to 23:00).

Press the

button and then press the

button to set the minute (from 00 to 50, interval 10

minutes).

Press the

button to save the setting.

You can switch the schedule ON/OFF time setting by means of the

and

buttons.

12 Repeat step 8 to 11 to program the other actions of the select day.

When all actions have been programmed, make sure that the display shows the highest action
number you would like save.

13 Press the

button to store the programmed actions

By pressing the

button several times, you return to previous steps in this procedure and

finally return to normal operation.

NOTE Programming space cooling or heating are both done in the same way. At the start to the

programming procedure space cooling or heating is select. After that, you have to return to
the start of the programming procedure to program the other operation mode.

Programming booster heating or domestic water heating

Programming domestic water heating or
booster heater is carried out as follows:

1. Use the

button to select the mode

(domestic water heating

or booster

heating

) you want to program.

2. Press and hold the

button for 3

seconds. The timer icon

is blinking.

3. Use the

button to select the action

number (1 2 3) you would like to program
or to modify.

4. Press the

button to confirm the

selected action number.

5. Use the

button to set the correct

action ON time, meantime the icon

appeared.

Press the

button and then press the

button to set the hour (from

00:00 to 23:00).

Summary of Contents for SXAO-110HAS
































Search results

Summary of Contents for SXAO-110HAS

Reviews:

Related manuals for SXAO-110HAS

Brands by name

Popular brands

Sakura SXAO-110HAS, Installation And Service Manual

Search results

Summary of Contents for SXAO-110HAS

Reviews:

Related manuals for SXAO-110HAS

Brands by name

Popular brands