------------------------------------------------------------------------------------
【
Smoke ventilator P6
】
Application method
1. Operation of the machine:
Punch the key on the front panel of machine based on the function needed.
◎
Description of keys:
“ON /OFF” Power supply. Press ON to start the machine.
“ I O II “ Start the fan motor and high low speed
“
“ key: Switch on /off the lamp
Attention
1. Make sure the power is disconnected before installation, wiring and maintenance.
2. Always keep the smoke ventilator clean.
3. In order to maintain proper function of the smoke ventilator, the space between
ventilator and gas stove must be between 24” ~ 32 “.
4. Make sure the discharge pipe is free of interruption to have suitable ventilation.
5. Read the sticker spec. information on the machine for better understanding.
6. Attention: Make sure the smoke is discharge outdoor to eliminate the fire hazard and
smooth ventilation. Never discharge smoke to narrow wall or to the ceiling partition, for
example , penthouse ,garage …
7. Attention: This machine applies for the ventilation of normal air. Do not use it to
discharge dangerous , explosive gases or vapor.
8. Warning: To eliminate the fire hazard, electric shock risk, never use other switch (solid
state relay)to replace the one installed at fan.
9. Warning: To eliminate the fire hazard, electric shock or endangering people , please
comply with following points:
(a) Use the smoke ventilator by the instruction of manufacture. In case of question,
contact manufacture immediately.
(b) Switch off power before maintaining or cleaning the smoke ventilator.
(c) Only competence technician is qualified to install and connect wiring by following
specification, including the instruction related to fire.
(d) The sufficient air supply is necessary to have complete burning of combustion
system and the discharge of exhaust via discharge pipe, and avoid the back flow of
exhaust air. Please follow the combustion system manual and safety specification,
such as NFPA, US Heating, ASHRAE. And local authorities regulations.
6
7
【
Smoke ventilator P7
】
------------------------------------------------------------------------------------
(e) Do not damage the electric wires and other hidden device while drilling holes in
walls or ceiling.
(f) The ventilation pipe must be connected to outdoor.
10. Warning: To eliminate fire hazard of smoke ventilator:
(a) Always clean the ventilation fan, never leave oil spots accumulated on the fan or
filtration wires.
(b) Switch on smoke ventilator during high temperature cooking.
(c) Never look away from the food cooking on the stove when the smoke ventilator is
running at high speed. The over cooked food generated smoke easily, or the hot oil
may jump out of pans which may cause fire on the running smoke ventilator. Slowly
heat up the temperature of boiling oil when the smoke ventilator is running at low
speed.
(d) Always watch if the smoke ventilator is running properly during cooking.
(e) Use proper cooking ware size.
11. Warning: To eliminate the fire hazard, electric shock or endangering people , please
comply with following points:
(a) Use tighten pan lid, blanket or tray to cover flame, then turn off the fire, Keep away
from been burned. If it is not possible to distinguish the fire, please leave the fire
place and call fire squad as soon as possible.
(b) Do not pick up on fire kitchenware – You may be burned.
(c) Do not try to distinguish fire with water, or wet table cloth or wet towel since it may
create violent steam.
(d) In case it is following condition, apply fire distinguisher to put out fire:
1. Make sure it belongs to ABC class, and you know how to operate it.
2. It is small fire, and burning inside original firing place.
3. Call fire squad already.
4. Make sure you are capable to put out fire and there is a safety exit to escape.
12. Warning: To minimize the fire hazard, please select metal discharge pipe.
Maintenance
In order to keep the best performance of the machine, and to prolong the life, you have to
pay attention to maintenance.
※
Disconnect the power during maintenance!
A. Always keep the machine surface clean:
After cooking, clean the surface and middle frame with dry cloth or mob with neutral
detergent. Always keep machine clean to have nice appearance and hygiene.
B. Cleaning accumulated dirty oil:
Dump away dirty oil once the oil collector tray (or oil cup) reached 80% level, to avoid
overflow.
8
