8
SAKURA – Total Air Conditioning Solution
11 OPERATING INSTRUCTIONS
1. After water inflow,water inlet and water level will be controlled by floater automatically.
2. After power on, the unit will be in stand-by condition.
3. After power on,press
to run in cooling mode,fan will start after submerged pump run for 2 minutes;If
any water shortage,fan will start without delay,and the unit will be run in fan only mode.Touch
again to
stop cooling.
4. After power on,press
to run in ventilation mode,and fan will start.Press it again to stop.
5. After power on,press
to run in clean mode.Drainage pump start and run for 2 minutes.Press it again
to stop cleaning
6. Under the condition of ventilation or cooling,if need swing function,press
.Press it again to stop.
7. It will take 3 seconds to run into a new working mode during mode switching.
8. The water inlet and water level is controlled by the floater.If water level display shows in one grill,it means no
water or not enough water;If shows in 3 grill,it means water reach to required level.In low water level,the
submerged pump will not work.Please keep the water inlet pipe through.The system default time is 12 hours.
9. Press
for 5 seconds in power off condition,the auto drainage time could be adjusted from every 0~72
hours.For 0 means it will not drainage automically.The system default time is 12 hours.
10. Press
for 5 seconds in power off condition,the frequency could be adjusted from 0-50 HZ.The
system default is 50HZ.
11. Press
for 5 seconds in power off condition,the direction of fan rotation could be adjusted.When
setting at “0”,the fan will operate in a normal directio n .At “1”,the fan will run in an opposite direction.The
system default is “0”(Note that it’s not suitable to run in an opposite direction for a long time,please be
cautious to use this )
12. The duration time for backlight is around one minute.The backlight will be on if touch any button in power off
condition.And the button can only work when backlight is on.
13. Touch “ON/OFF” to turn off the machine.
14. Do not put any heavy stuff on the top of the unit.
15. During operation, make sure that there’s no any object to cover or bolck the air inlet and air outlet.Do not put
your hand or other object to the air outlet and air inlet.
16. If not using the unit for a long time or in the winter,please drain the water out of the tank,and keep the unit
running for 10 minutes in ventilation mode,to dry the cooling pads.Then cut off the power and cover the
cabinet by diaphragm for next time using.
17. Suggest to drain the water out of the tank every week and clean the filter.If using in the dirty
environment,please drain the tank for more
