USING THE ELECTRIC SAMOVAR
Before using the electric samovar:
1. Plug the electric samovar into an outlet.
2. Fill the electric samovar up to MAX line,
and run a heating cycle by pressing
POWER ON/OFF button.
3. Once the boil cycle is complete, discard
the water and repeat this process one
more time.
NOTE: ONLY fill the electric samovar body
with water. DO NOT heat or boil other
liquids.
1. Plug in the electric samovar. Fill the electric
samovar with the desired amount of water.
Put the porcelain teapot on top of electric
samovar body.
2. Press POWER ON/OFF button once to
start heating cycle. To indicate that the
heating cycle has started, the red light
ring will illimunate, and the display
will show current temperature as it rises.
Powering off:
To manually power off, press
and hold the POWER ON/OFF button
for 3 seconds.
NOTE: DO NOT start the heating cycle
when the electric samovar is empty.
If the electric samovar detects there is
not enough water in it, the electric
samovar shuts off, and the temperature
display will read "NO WATER." Plug out
from the outlet and let the electric
samovar cool for 10 minutes before
refilling.
