SAKAWA AST10, User Manual

Page: 80 / 101

80
8. Never alter electrical devices or parts of the log chipper.
9. If you have a hard or hard-to-break log, never force the chipper for more than 5 seconds;
if this is the case, stop the machine and turn the trunk 90 degrees and start again.
If the trunk is not yet divided, stop the machine, remove the trunk, twist it again and repeat the
process.
10. Never leave the machine running
unattended, if the machine does not work, stop and unplug it.
11. Never use this machine near natural gas, gasoline tank or other flammable materials.
12. Never open the switch box or engine cover. If necessary, contact a qualified electrician.
13. Make sure that the machine and cable are kept away from the water. Take care to handle the
cable.
Never pull or tear the power cord. Keep the cable away from high temperatures, oil and sharp
objects.
14. The specified length / diameters of the trunk capacity is for reference only.
I
mplementation
Follow the instructions below before starting:
- The machine must be positioned in such a way that it is stable and safe against slipping. Provide
enough space around your log splitter so you can operate it safely.
- Make sure that no unauthorized person (especially children) can approach your work area.
- All safety and protective devices must have been correctly fitted before commissioning. Check if
all screws, bolts, hydraulic couplings and pipe clamps have been tightened correctly. Before each
start, always make sure the hydraulic oil level is correct.
- This machine should never be used when it is in an inoperable condition or needs some
maintenance. Before using this log splitter, familiarize yourself with your control