2
Initial Synchronization of the Time and Date
IMPORTANT: You must first set the time and date of your ProTrack device before you initially wear it and start
measuring,
To set the device time and date:
1.
Download the ProTrack Fitness application to your compatible mobile device.
See the ‘Installing the ProTrack Fitness App’ section for further information and instructions.
2.
Launch the ProTrack application and complete the initial set up. It is very important during this initial set
up to make sure your ProTrack device has been successfully connected and paired to the ProTrack
application on your mobile device. Once your ProTrack device and the ProTrack app are paired, the date
and time on each will be synched.
See the ‘Initial Setup and Device Pairing’ section for further information and instructions regarding the
initial setup.
NOTE: If you do not sync the device’s date and time to your smart phone/tablet’s date and time before
using your ProTrack device, the measurements will be deleted when you do sync your device with the app
upon first use. You will lose your measurements if the date and time sync is not done before you begin
exercising.
3.
Once you have completed the initial set up and pairing of your device, check that the time on your device
and the time on your compatible smart phone/tablet are the same. If they are not, tap Daily Activity from
the home screen to automatically sync the date and time.
NOTE: After use, when the battery level is low, make sure to sync your measurements to the app before the
battery depletes and you install a new, fresh battery. After changing to a new battery, you must re-sync your
device’s time and date to your smart phone/tablet.
