O P ER AT I N G I N S T R U C T I O N S
1. Connect power adapter to DC power jack
on bottom of unit.
2. Remove the terrazzo cover from the base,
then remove the water tank cover from
the water tank.
3. Fill water tank with room temperature tap
water to no higher than max. water level line
(200 ml/6.8 fl oz). Tilting the unit can cause
water to run into the diffuser's ventilation
system and out the bottom - to ensure correct
usage, always bring water to your ultrasonic
diffuser and not the other way around.
4. Add 10-15 drops (depending on prefe-
rence) of your favourite Saje diffuser
blend to the water.
5. Replace the water tank cover and then the
terrazzo cover; ensure that the terrazzo cover
is pressed down over the silicone o-ring.
6. Plug power adapter into electrical outlet.
water level
water level
water level
7
