background image

United States

Electronics and engines requiring inspection or repair should be shipped to the following 
address:

Horizon Service Center

4105 Fieldstone Road

Champaign, Illinois 61822

USA

All other Products requiring warranty inspection or repair should be shipped to the 
following address:

Horizon Product Support

4105 Fieldstone Road

Champaign, Illinois 61822

USA

Please call 877-504-0233 or e-mail us at [email protected] with any 
questions or concerns regarding this product or warranty.

W

ARRANTY 

& R

EPAIR 

P

OLICY

Consumer Warranty and Repair Policy

Saito engines are guaranteed against workmanship and manufacturing defects for 
a period of 3 years from the original date of purchase. This warranty is limited to the 
original purchaser of the engine and is not transferable. Warranty repairs will not cover:

Normal engine wear

• 

Damage due to insufficient maintenance

• 

Damage related to over-revving of engine due to small prop size or unreasonable use

• 

Rusted bearings

• 

Crash damage

• 

Damage due to use of improper oil and/or oil ratio

• 

Damage due to lean runs, such as rusted bearings, seized connecting rod or piston, etc.

• 

Damage caused by foreign objects (dirt or other debris)

• 

 Damage caused by unreasonable mountings or running conditions (dust, insufficient 

• 

cooling, improper mounting, improper propellor size, or lack of balancing, etc.)

Damage due to improper disassembly

• 

Modifications of any kind

• 

Repair or replacement and any warranty coverage is Horizon’s sole decision

• 

24

校了_斎藤製作所_MCFSE冊子cs3.indd   24

2010/11/04   10:01:53

Summary of Contents for FA-170R3





























Reviews: