8 Now try out all your controller’s buttons and controls to show that it is working
properly. When you have finished, click
OK
.
9 At the Programming Software screen, select
Typical User
and click
Next
.
10 At the Registration screen, select
Register
and follow the on-screen instructions or
select
Register Later
and click
Next
.
11 Click on
Finish
to complete the installation.
b) Drivers and programming software for advanced users
1 Follow points 1 – 7 of the install procedure in A), then at the Programming Software
screen, select
Advanced User
and click
Next
.
2 At the Programmable Controller Drivers screen, click
Update
and follow the on-
screen instructions.
3 Then at the Installation of programming software successful screen, click
Next
.
4 At the Registration screen, select
Register
and follow the on-screen instructions or
select
Register Later
and click
Next
.
5 Upon completion of the installation, you have the option to Run Profile Editor, which
will give you a view of the 3D programming environment. If you do not wish to see
the Profile Editor at this point, just uncheck the box and click on
Finish
to complete
the installation.
Installation for Users of Windows® 98 and Me
a) Drivers only for typical users
1 With your computer switched on, close down any programs that are currently running
and insert the Saitek Smart Technology CD into your CD-ROM drive.
2 When the Introduction Screen appears, click
Install Software
to continue.
3 When the Welcome screen appears, click
Next
to continue. (If the CD does not run
automatically, select
Start
from the Windows® Taskbar, then
Run
and type
D:\Setup.exe
and click
OK
).
