6
The Pro Flight Instrument Panel will not register automatically if you have installed the Pro
Flight Instrument Panel before installing FSX. To register the Pro Flight Instrument Panel with
FSX, click on the “Launch the Flightsim X plugin manually” icon to re-run the program.
You can select one of the above six screens to be displayed on the Flight Instrument Panel.
Press the cursor up or down buttons at the bottom centre of the panel to scroll through the
screen displays.
Additional buttons
The six buttons on the left of the Instrument Panel open additional cockpit screens or
displays when flying in FSX. Each button is labelled with the corresponding display to the
right of it. The Map, Main Panel, Radios and GPS buttons will open those screens or cockpit
panels when flying most aircraft. The panel 4 and 5 buttons will open different screens or
panels depending on the aircraft being flown. Press the button once to open the panel or
screen and again to close it (except map where you must click on OK or press return to
close the map screen).
Note: Pressing any of the six buttons when FSX is not loaded will switch the
panel display off and on.
You can connect multiple Instrument Panels to your PC to show different cockpit displays
simultaneously. Each panel uses system resources - see Advanced options below to connect
multiple panels with maximum system performance.
Advanced options
If you have more than one PC connected to a LAN you can connect multiple instrument
panels to a secondary PC which will display flight information from Microsoft FSX running on
your primary PC. This can be useful to free up system resources for FSX.
Definitions
Server = The PC that will be running FSX and the
main Flight controllers attached.
Client = The PC that will be linked to the Server via
the LAN. The instrument panels will be connected to
this PC to alleviate the processing stress of having
multiple screens connected to one PC.
Summary of Contents for Pro Flight Instrument Panel
Page 1: ......
