3
Check the wireless receiver is properly inserted in one of your PC’s USB
ports.
4
Insert the wireless receiver in another of your PC’s USB ports.
5
Press the button on the underside of the mouse once to re-establish the
mouse’s wireless connection with the receiver.
Important Information
Some experts believe that using any mouse or trackball may cause serious
injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or
weakness in these areas, please consult a qualified health professional
immediately.
To reduce the risk of injury, please follow these precautions:
•
Take frequent breaks, get up and walk around several times every hour.
•
Vary your tasks throughout the day.
•
Keep your shoulders relaxed with your elbows at your side. Position your
keyboard and mouse so you do not have to reach.
•
Adjust your chair and keyboard so your upper arms and wrists are straight.
•
Avoid resting your wrists on sharp edges.
Technical Support
Can't get started - don't worry, we're here to help you!
Nearly all the products that are returned to us as faulty are not faulty at all - they
have just not been installed properly.
If you experience any difficulty with this product, please first visit our website
www.saitek.com. The technical support area will provide you with all the
information you need to get the most out of your product and should solve any
problems you might have.
If you do not have access to the internet, or if the website cannot answer your
question, please contact your local Saitek Technical Support Team. We aim to
offer quick, comprehensive and thorough technical support to all our users so,
before you call, please make sure you have all the relevant information at hand.
To find your local Saitek Technical Support Center, please see the separate
Technical Support Center sheet that came packaged with this product.
Information for Customers in the United States
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the
M100Z WIRELESS LASER MOUSE
System Compatibility
PC running Windows XP/XP64/Vista/Mac OS X
Installation
Powering the mouse on/off
The mouse will switch itself on when you insert new batteries. It will enter sleep
mode when not being used and can be woken simply by moving the mouse.
To switch the mouse off when not using for long periods, press and hold the
button next to the battery compartment on the underside of the mouse for three
seconds. To restart the mouse, press and hold the button for three seconds.
An LED behind the scroll wheel will flash to indicate low battery life. We suggest
you replace the batteries when this happens.
Troubleshooting
If the mouse does not work:
1
Check the batteries have not expired and are inserted properly.
2
Make sure the mouse is switched on by pressing the button on the
underside for three seconds.
Insert the wireless receiver in
one of your PC’s USB ports. With
your PC switched on, follow the
device installation wizard to
complete the installation of the
new USB device.
On the underside of the mouse,
open the battery compartment,
insert the batteries in the
compartment in the direction
shown and replace the cover.
1
2
PM55_manual.qxd 14/08/2008 09:58 Page 2