Saitek Cyborg 3D, User Manual

Page: 4 / 52

Installation for Users of Windows® XP
Quick Install (Drivers Only)
This installation will
ONLY
install the drivers for your Saitek controller. The Full Install (below), will install the drivers and the Saitek Smart Technology
programming software for your Saitek controller.
Note
: Please do not connect your Saitek controller until asked to by the installation procedure.
1 With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your
CD-ROM drive.
2 When the
Welcome
screen appears, click
Next
to continue. (If the CD does not run automatically, select
Start
from the Windows® Taskbar, then
Run
and type
D:\Install.exe
and click
OK
- where
D:\
is letter of your CD-ROM drive).
3 After reading the Disclaimer, select the
I accept the terms of the Disclaimer
option and click
Next
to continue.
4 At the
Device Driver Installation
screen, click on
Next
and follow the on-screen instructions.
5 When prompted, plug your controller’s USB connector into your computer, then click on
Configure
and then
Continue Anyway
. Follow the
on-screen instructions until you reach the
Controller Properties
screen.
6 When the
Controller Properties
screen appears, click
Next
to view the
Test
screen.
7 Now try out all your controller’s buttons and controls to show that it is working properly. When you have finished, click
OK
.
8 At the
Programming Software
screen, select
Typical User
and click
Next
.
9 At the
Registration
screen, select
Register my Saitek controller online
and follow the on-screen instructions or select
Register Later
and click
Next
.
10 Click on
Finish
to complete the installation. Your Saitek controller is now ready for use with your favorite games.
Full Install (Drivers and Programming Software)
This installation will install the drivers and the Saitek Smart Technology programming software for the Saitek controller.
1 Follow points 1 – 7 of the install procedure in Quick Install (Drivers Only), then at the
Programming Software
screen, select
Advanced User
and
click
Next
.
2 At the
Programmable Controller Drivers
screen, click
Update
and follow the on-screen instructions. At this point you will be asked to install such
features as the Saitek Magic Mouse and Saitek Magic Keyboard (these are what XP calls the various elements of your Saitek controller). Continue
to click on
Next, Continue Anyway
and
Finish
to accept the installation until the Installation of programming software successful screen appears.