This document is property of Saitek Srl. Copying it and/or spreading the contents to third parties without authorization is forbidden.
Saitek Srl reserves the right to modify the present document at any moment without prior notice. 04-2018
FLAME CONTROL
SERIES
page 1 di 5
ELECTRODE / UV FLAME DETECTION
IN ACCORDANCE WITH STANDARD EN 298
USE INSTRUCTIONS
.
Read carefully and preserve this use and
maintenance reference manual.
CONFORMITY .
The manufacturer declares that:
- The
has been designed,
realized and tested in compliance with
the European Rule
EN298
relative to
“For flame detection and signalling in
continuous operation with ionization
control
”
- The
complies to the
essential requirements provided for
by following Directive:
-
2006/42 in conjunction with the
relevant sections of EN 746,
-
2014/35/UE in conjunction with the
relevant standards,
-
2014/30/UE in conjunction with
the relevant standards relating to
radiation
- EMC emission requirements must be
tested after incorporation into the
equipment.
AF1-AF1q APPLICATIONS .
provide to detection and
indicate, when regularly employed, the
presence of a flame.
The
monitor intermittent
flame,
or rather flame that shall be
turned off at least once in the 24 hours.
The flame is checked by an ionization
electrode or UV sensor.
For grounded or ungrounded mains.
The
can be applied directly to
the burner in industrial thermal processes
for
metals,
glass,
ceramic,
plastic,
chemical, etc
….
Besides it can be applied on atmospheric
burners for general heating.
ATTENTION
Avoid presence of condensation inside
the box and on the card surface.
TECHNICAL SPECIFICATIONS .
- Data
relating
to
power
supply
characteristics (V ~ / Hz / W), working
temperature (° C), IP00.
-
Flame detection with 1 electrodes
or UV lamp
- LED
display:
power
on,
flame
detection OK and flame level.
- Alarm contact in exchange: energized
when in flame detection.
- Operating voltage can be
230 V AC and 115 V AC (to be
specified on order)
FLAME LEVEL VIEWER CARD .
The
flame control is supplied
together with the additional display card
STK035. This offers the opportunity to
control the functionality of the equipment
in a more effective and immediate way.
This is made possible by the four LEDs for
displaying the flame level.
ATTENTION!!!
Any
indication
and
operation
indicated in the present manual
shall be carried out only by
authorized and qualified personnel
in charge.
Improper and incorrect assembly,
adjustment, modification, use or
maintenance can cause serious
damages and accidents to persons
and things.
Read carefully the instructions
before installing the appliance. The
assembly shall be in compliance
with the regulations in force.
In order to prevent accidental
electrocutions it is recommended
you disconnect the electric current
before opening the appliance.
Before supplying power check the
value reported on the tag.
