8
3
ASSEMBLY AND COMMISSIONING
The machine is delivered fully equipped and assembled and is ready for operation after connection
to the appropriate power supply.
3.1
Electrical connections
Check that :
The voltage supply corresponds to the information indicated on the machine.
Available power supply must have ground connection in conformity with safety regulations.
The connection wires must be in a perfect condition (damages cables could lead to electric shocks).
3.2
Starting the machine
Before to start, check :
- The filter is installed
- The vacuum hose and the accessories have been correctly fitted into the inlet
Turn on the power switch once the check up is done.
3.3
Use
When operating, do not :
- Crush, pull, damage or step on the cable that connects to the electricity mains
- Only disconnect the cable by removing the plug (do not pull the wire)
- Only replace the electric power cable with one of the same type as the original; the same rule applies
if an extension is used
- The wire must be replaced by the manufacturer's service centre staff or by equivalent qualified
personnel
After using, the extractor must not be stored outdoor or in a damp place.
3.4
Use of a paper bag
The bag paper is designed to be used only dry for aspiration of dust.
