SAINT-GOBAIN 70184603115, Operating Instructions Manual, Page: 15 / 24

VERS. 13.11.2018 CM 35 Mini Clipper_MAN_EN
15
5 OPERATING THE MACHINE
You will find in this chapter some advice about where and how to put up the machine.
5.1 Jobsite
5.1.1 Siting the machine
Remove from the site anything, which might hinder the working procedure!
Make sure the site is sufficiently well lit!
Observe manufacturer's conditions for connecting to power supplies!
Place electric cables in such a way that damage is excluded!
Make sure you have a continual adequate view of the working area so you can intervene in the
working process at any time!
Keep other staff out of the area, so you can work securely.
5.1.2 Area dedicated for the use and maintenance of the machine
You should have 2 m in front of the machine and 1,5 m on both sides to get a comfortable use of the
machine.
5.2 Cutting methods
To use the machine correctly, you must face it with one hand on the handle of the cutting head, and
the other on the conveyor cart. Always keep your hands away from the moving blade. Open the
switch cover and press the green button to start the machine. To stop either use the red button or
press directly on the switch front cover.