SAINT-GOBAIN 70184601937, Operating Instructions Manual

Page: 17 / 24

VERS.2017.03.08 CST ALU_MTS_MAN_EN
17
5.3 General advice for the cutting

The CST is designed to cut materials with maximal dimensions of :
Modèle
CST 120 ALU
115V
CST 120 ALU
230V
CST 100 ALU
115V
CST 100 ALU
230V
Ø disque
350 mm 350 mm
350 mm 350 mm
Dimensions des
pièces à couper
(L x l x h)
1200
x660
x120 1200
x660
x120
1000
x660
x120
1000
x660
x120
Poids maximal
des pièces à
couper
80 kg 80 kg 66 kg 66 kg

The width of the table and of the material can be increased by adding a table extension.

Before commencing work make sure tools are firmly seated!

Select the right tools as recommended by the manufacturer depending on the material to be
worked, the working procedure (wet cut) to be carried out and the required efficiency.

Apply cooling water continuously whilst cutting and in good time! Make sure the water pan
contains enough water.

When dry cutting, ensure sufficient dust extraction and wear a dusk protection mask!

If the thermal protection trips, allow the thermal protection to cool down. Wait a few minutes to
allow the motor to cool down before restarting the machine.