19
2 Tone: 16 groups of 2 Tone signaling can be set via software. Press
[MENU]
+
[5]
to make signaling transmission, then press
key to select the
desired 2 Tone code, and press PTT key to transmit the 2 Tone signaling.
2 Tone decode: If the signaling for the RX frequency or channel is set as 2 Tone,
when a signal is received, the 2 Tone code will be decoded, and the LCD screen
shows “2TONE” icon. When the received 2 Tone code is decoded successfully,
the LCD screen shows “2TONE OK”.
5 Tone: 16 groups of 5 Tone signaling can be set via software. Press
[MENU]
+
[5]
to make signaling transmission, then press
key to select the desired
5 Tone code, and press PTT key to transmit the 2 Tone signaling.
5 Tone decode: If the signaling for the RX frequency or channel is set as 5 Tone,
when a signal is received, the 5 Tone code will be decoded, and the LCD screen
shows “5TONE” icon. When the received 5 Tone code is decoded successfully,
the LCD screen shows “5TONE OK”.
DTMF:
The DTMF signaling can be set via software. DTMF transmission can be
made manually or through DTMF address book. Press
[MENU]
+
[5]
to make
DTMF signaling transmission, you can input the desired DTMF code via keypad or
select one of the DTMF codes from address book, then press PTT key to transmit.
DTMF decode:
If the signaling for the RX frequency or channel is set as DTMF,
and the transceiver’s self ID has also been set via software, when a signal is
received, the DTMF code will be decoded, and the LCD screen shows “DTMF”
icon. When the received DTMF code is decoded successfully, the LCD screen
shows “DTMF OK”.
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “SIGNALING”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “Signal Type”, press
[MENU]
to enter into parameter setting. Use
key to select the
desired signaling type. Press
[MENU]
to confirm and exit.
Side tone setting
This function is to turn on or turn off the prompt tone when sending out the
signaling codes. If side tone is turned on, the radio will sound a string of noise
when the signaling codes are sent out.
Press
[MENU]
key, then press
[MENU]
again to enter into first-layer menu. Press
key to select group “SIGNALING”, press
[MENU]
to confirm and enter
into second-layer menu. Press
key to select item “Side Tone”, press
[MENU]
to enter into parameter setting. Use
key to select ON/OFF.
Press
[MENU]
to confirm and exit.
Encode mode setting
This function is to select the desired DTMF signaling transmit mode. Two options
are available: Manu and Address Book.
Manu: Input the desired DTMF codes in sequence via keypad, and then press PTT
key to send out the DTMF code manually.
Summary of Contents for RST599
Page 15: ...10 23 59 Time display Current frequency display Channel number...
Page 16: ...11 Radio illustration...
Page 41: ...36 QT DQT sheet...
