User Manual
Aroma Diffuser
TROUBLESHOOTIN
TROUBLESHOOTIN
TROUBLESHOOTIN
TROUBLESHOOTING
G
G
G
Please refer to the table below in the event of the product operating abnormally
Symptom
Symptom
Symptom
Symptom
Possible
Possible
Possible
Possible Cause
Cause
Cause
Cause
Solution
Solution
Solution
Solution
Will not
switch
on-switch off
early
�
Is there enough water in
the tank?
�
Is the power cord
connected property?
�
Add water to the tank
�
Disconnect, check cables and re-connect
carefully.
No mist or
abnormal
mist
�
Not enough water?
�
Too much water?
�
Dirt on the Ultrasonic
plate?
�
Cover and inner cover are
not installed properly?
�
Dirt on the air suction port
on the underside of the
base?
�
Add suitable amount of water in the tank.
�
Water must never be filled over 500ML
(MAX) line.
�
Please refer to Maintenance instructions
Remove and re-install correctly, so vapors
can be released freely.
�
Clean the air suction port of any dust.
�
Restricted airflow will affect mist.
Water
leakage from
product
�
Cover and inner cover are
not installed properly?
�
Has the unit been tipped
over?
�
Low temperature or high
humidity?
�
Remove and reinstall correctly, so vapors
can be released freely.
�
Follow accidental leakage instructions.
�
Under these conditions, the mist may
condense quickly into water droplets.
SPECIFICATION
SPECIFICATION
SPECIFICATION
SPECIFICATIONS
S
S
S
Dimensions
Approx 168 x 121MM
Weight (excluding adaptor)
Approx 520g
Power: Input / Output
AC100-240V 50.60HZ / DC 24V 650MA
Length of cord
Approx 170CM
Electric consumption
Approx 13W
Time Mode
60/120/180/ON minutes
Tank Capacity
500ML
LED light
9 Bulbs
Materials
Upper parts PP, lower base ABS
Accessories
AC Adapter and measuring jug
Method of mist production
Ultrasonic vibration at approx 2.4MH
