- 32 -
Press the
ALARM
key to turn on (the alarm icon will appear )
and off the alarm.
Press the
SNOOZE
key twice at any time to return to the
normal mode. After 30 seconds of inactivity, the alarm mode
will time out and return to normal mode.
The following is a list of the individual alarm parameters that
are set (in order):
Note:
To prevent repetitive temperature alarming, there is a
0.9 °F(0.5
°C
) tolerance band. For example, if you set the high
alarm to 80.0°F(26.7
°C
) and silence the alarm, the alarm icon
will continue to flash until the temperature falls below 80.0°F
(26.7
°C
), at which point, the alarm will reset and must increase
above 80.0°F(26.7
°C
) to activate again.
1.Alarm hour(alarm 1)
2.Alarm minute(alarm 1)
3.Alarm hour(alarm 2)
4.Alarm minute(alarm 2)
5.Outdoor temp HI alarm
6.Outdoor temp low alarm
7.Outdoor humidity HI alarm
8.Outdoor humidity low alarm
9.Outdoor AT HI alarm
10.Outdoor AT low alarm
11.Outdoor dew point HI alarm
12.Outdoor dew point low alarm
13.Outdoor feels like HI alarm
14.Outdoor feels like low alarm
15.Wind Gust HI alarm
16.Wind average HI alarm
17.Rainfall (RATE) HI alarm
18.Rainfall (24h) HI alarm
19.Absolute pressure HI alarm
20.Absolute pressure low alarm
21.Relative pressure HI alarm
22.Relative pressure low alarm
23.Indoor temperature HI alarm
24.Indoor temperature low alarm
25.Indoor humidity HI alarm
26.Indoor humidity low alarm
27.Indoor dew point HI alarm
28.Indoor dew point low alarm
29.UV Index HI alarm
30.Sunlight HI alarm