www.sailwinlight.com
6
Safety instructions
Equipment must be stored in dry conditions
（
The air humidity is within 35%
）
Do not expose the equipment to high temperature above 30 degrees outdoors for too
long
Equipment should not be stored in leaky environment
Do not store equipment in environments with corrosive and flammable substances
Ignition Conditions
Equipments should not be damped or flooded, and should be avoided from being used
on the same stage as stage equipment which produces water mist as far as possible
The discharge of outdoor powder should be guaranteed to be 7-8 meters above the
equipment without shield.
Keep watch at a safe distance of 3 meters from the equipment during discharge
Do not set off outdoors in heavy rain and snow
Do not block the bottom air inlet in any form or seal the bottom of the equipment in
any form to obstruct the air inlet passage, otherwise it will cause the fan to work
abnormally
Do not tilt the equipment
（
No angle, no form of tilt
）
Regulations on Safe Use
In the process of heating and constant temperature, do not touch the top and side
outlets of the equipment.
During the working process of the equipment in the discharge area, it is strictly
forbidden for unrelated personnel to approach it.
Do not place shield on top of equipment during heating, constant temperature and
discharge
After the discharge, try to use up the consumables in the shaking. If there is too much
left over, please cover the lid to prevent the leakage and dampness of the consumables
(storage time should not exceed 2 days).
Do not pour the consumables into the spray nozzle. If poured in, start the equipment
quickly and blow the consumables out.
Do not remove the rubber footpad at the bottom by yourself
Unused consumables need to be sealed and moistureproof preserved
When using equipment, be sure to follow local laws and regulations.
