3
Sailrite MC-SCR Power System |
PoweRPluS wheel InStallatIon
adjuSt the tIMIng Belt
Insert the cogged motor pulley on the end of the
mounted MC-SCR motor and tighten the set screw on
the shaft flat (
Figure 9
). Align the pulley with the balance
wheel belt groove and then really tighten down the
screw.
Put the timing belt around the motor pulley and guide
it up and over the PowerPlus balance wheel. Adjust the
belt tension so that is has 1/16" slack when depressed
at its midpoint (
Figure 10
). Adjust by moving the motor
position in the motor bracket slots. Loosen the nuts,
adjust the motor position, and retighten.
Reposition the belt driven bobbin winder as necessary to
fill bobbins.
