background image

Introduction

Congratulations on your new Iridium handset or PSTN (Public
Switched Telephone Network) telephone.

Your Iridium system is a modular system that consists of an antenna,
transmitter/receiver, handset and optional PSTN telephone/PBX
(Private Branch Exchange) switchboard.

You can operate the Iridium system in voice mode from a handset
and/or PSTN telephone. To the system you can connect up to five
handsets and one PSTN telephone or PBX switchboard.

Sailor marine equipment is specially designed for the extremely
rugged conditions on board a ship, based on more than 50 years of
experience with all kinds of boats, from small pleasure crafts, over
fishing boats working under all climatic conditions, to the biggest
ships.

EuroCom Industries A/S (ECI) develops and produces high-
technology maritime communications equipment under the
brandname Sailor 

.

ECI is one of the world’s largest suppliers of communications
equipment for the maritime segment,  a position which has been
maintained by means of constant and extensive product develop-
ment.

The Sailor products are sold through a global network with more
than 60 qualified and trained distributors.

Please note

Any responsibility or liability for loss or damage in connection with
the use of this product and the accompanying documentation is
disclaimed. The information in this manual is furnished for informa-
tional use only, is subject to change without notice, may contain
errors or inaccuracies, and represents no commitment whatsoever.
This agreement is governed by the laws of Denmark.

Doc. no.: M4150GB0

Issue: G/0303

Summary of Contents for SC4150





















Reviews: