Sailor Inmarsat B, Workshop Manual

Page: 80 / 134

6 SERVICE INTERFACE Inmarsat B
6.2 ALARM
Shows the state of the indicator output pins in the Alarm connector X35.
Syntax ALARM
6.2.1 ALARM
The state of the indicators are listed with a logical number, the connector and pin number, the title and
the state
on or flash or off. The state on is an active low on the pin. Off is high impedance.
6.3 BOOK
Shows or changes the contents of the phone book.
Syntax BOOK
BOOK entry
BOOK entry number
BOOK entry number “name”
BOOK CLEAR
BOOK entry CLEAR
6.3.1 BOOK
Shows all phone book entries not empty. This command may be used to make a backup of the phone
book, i.e. on a disk file. To restore the phone book, simply clear the phone book (refer to 0) and play back
the file.
6.3.2 BOOK ENTRY
Shows the specified phone book entry.
6.3.3 BOOK ENTRY NUMBER
Changes the phone number of the specified phone book entry. The name, if any, will not be changed.
6.3.4 BOOK ENTRY NUMBER “NAME”
Changes the phone number and the associated name of the specified phone book entry. The name must
be in quotes.
6.3.5 BOOK CLEAR
Empties the entire phone book.
6.3.6 BOOK ENTRY CLEAR
Empties the specified phone book entry.
PAGE 6-4 9905