Sailor COMPACT HF SSB T2130, Technical Manual

Page: 83 / 138

3 SERVICE T2130
SP-24-0
Tests the EEPROM’s for write and read.
Example:
Operator: Key: 24-0 <ENT>
RE2100: Displays: ‘SP-24-0’
---
---
RE2100:
Displays: ‘SP-24-0’
‘ A. ‘
Legend: A. = No errors found
Err.1 = Error found in U11
Err.2 = Error found in U12.
NOTE! the duration of the test is approx. 8 seconds.
SP-24-1
Deletes all stored Retune Data from the EEPROM’s.
Example:
Operator: Key: 24-1 <ENT>
RE2100: Displays: ‘SP-24-1’
---
---
RE2100:
Displays: ‘SP-24-1’
A.
Legend: A. = Deleting finished
SP-24-2
Initializes EEPROM’s from scratch. Stores standard data in the EEPROM.
Example:
Operator: Key: 24-2 <ENT>
RE2100. Displays: ‘SP-24-2’
---
---
RE2100:
Displays: ‘SP-24-1’
A.
Legend: A. = Initializing finished.
NOTE! The T2130 must be turned off and on after the execution of this Service Programme. The T2130
MUST be calibrated after this Service Programme.
SP-25
Calibrates the T2130.
Example:
Operator: Connect an oscilloscope to the internal Dummy Load in the T2130.
Operator: Connect a Voltmeter to the battery supply pins at the Connection Board (6) in the bottom of
the T2130.
PAGE 3-29
9315