mode, press the Power/Shutter button quick to start video
recording. The red led will blink and you can hear a sound.
Press the same button to stop recording.
To confirm the camera is in video mode, Screw out the rear
cap , and the video/photo switch “ ” must be to right for
video recording standby mode.
Take Snapshot Photos
Screw out the rear cap , switch “ ” to left for photo standby
mode, close the cap.
Turn on camera by pressing POWER/Shooter button for 2
seconds. The green led will be on and the red led will flash 2
times, then comes to standby mode. Press the shutter button
to start taking photos (red led will blink). Press the shooter
button “ ” again to stop. In this mode the camera will take
sequential photos every 3 seconds until the battery die or the
Micro SD card is full.
Remember to place an optional MicroSD card before
your recordings!
Summary of Contents for Bullet HD
Page 1: ...User Manual ...