BEETLE CAT
6.
Find the gaff throat block, hook the block up to a brass eye on the mast, lead the
line down the mast and through the eye “S” near the mast step on the starboard
side. Fix the line around cleat “D” on the starboard side.
7.
Spread the brass hook rings that are attached to the sail apart and close each
around the mast.
8.
Set the pin at the end of the boom into the brass hole near the bottom of the mast.
Secure the other end of the boom by attaching the hook on the line to the traveler,
leading the end of the line through the two blocks on the boom. Attach the end of
the line onto the cleat at the center of the centerboard housing in the cockpit.
Your Sail Classics model of the Beetle Cat should now be complete. Enjoy!
Sail Classics, Inc.
PO Box 747 Lakebay, WA 98349
Phone: 800-652-3757 Fax: 253-884-7858
