5
INSTALLATION
Location
• Avoid installing near machines emitting high frequency waves.
• Not suitable for chemical plants such as liquefied carbon dioxide refrigerant plants.
• A failure may occur in certain locations such as the following:
• Areas with large amount of oil droplets (including machine oil) or vapors
• Salty areas near oceans, etc.
• Hot springs emitting sulfidizing gas, etc.
• Heavily acidic or alkaline places.
Special maintenance or parts are required for use in the above places. For details, contact the dealer where you
purchased the product.
• Leave an enough space around the air intake and outlet of the outdoor unit so that the ventilation is not restricted.
• Avoid places where strong wind may blow against the air intake and discharge of the outdoor unit.
• Attach a snow stand, snow hood, etc. to the outdoor unit for use in snowfall areas. For details, contact the dealer
where you purchased the product.
• Make sure drain water from the outdoor unit is emitted into places with good drainage.
• Make sure the air filter is attached to the indoor unit. If not, dust may accumulate on the heat exchanger or other
parts in the air conditioner and cause a water leak.
• Keep a distance of at least 1 m between the air conditioner/remote controller and a TV or radio. Failure to
observe this precaution may cause visual disturbance or noise.
• Leave a distance of at least 1.5 m between the air outlet and a fire alarm. If this precaution is not observed, the
alarm may not work properly or detect fire in case of fire.
Be careful of operation sounds
• Locate the unit in a place secure enough so that the sounds and vibrations do not increase.
• If something is placed near the air discharge of the outdoor unit, noise may increase.
• Be careful not to disturb your neighbors with cool/warm air or noise coming from the air discharge of the outdoor
unit.
USER’S MANUAL
USER’S MANUAL
33
34
POWER
SWING
SWING
HYGIENIC
PM 2.5
FAN
TURBO
AUTO
COOL
COOL
HEAT
DRY
FAN ONLY
AUTO
SLEEP
CLEAL
RH
%
TIME-ON
TIME-OFF
TIME-OFF
AM
PM
SET
DOWN
UP
FAN
ON/OFF
POWER
SWING
HYGIENIC
PM 2.5
PM 2.5
FAN
TURBO
AUTO
COOL
HEAT
DRY
FAN ONLY
FAN ONLY
AUTO
SLEEP
CLEAL
RH
%
TIME-ON
TIME-OFF
AM
PM
SET
DOWN
UP
FAN
ON/OFF
POWER
POWER
SWING
FAN
HEAT
TIME-ON
TIME-ON
TIME-OFF
TIME-OFF
AM
PM
PM 2.5
SET
DOWN
UP
FAN
ON/OFF
SET
DOWN
UP
FAN
ON/OFF
SET
DOWN
UP
FAN
ON/OFF
POWER
POWER
SWING
FAN
HEAT
TIME-ON
TIME-ON
TIME-OFF
TIME-OFF
AM
PM
PM 2.5
SET
DOWN
UP
FAN
ON/OFF
Error Code Check
When status is ON or Off at home page
Press and Hold Set button for 5 seconds will be Error Code Checking.
Finish Checking by press and hold Set button for 5 seconds or waiting for 5 seconds,
go back to home page.
Press and hold Set button for 5 seconds.
Display Error Code symbol and Error Code Value [ 00-FE]
ID Setting ( Address setting)
When status is ON or Off at home page
Press and Hold Set button for 10 seconds will be
ID.
Press up or down to change the ID ( range 0 - 63 )
Finish Checking by press and hold Set button for 5 seconds or waiting for 5 seconds,
go back to home page.
present
Press and hold Set button for 10 seconds.
Display Address Value [ 00-63]
Change Unit of Temperature between Celsius and Fahrenheit
At home page
Press and hold Up and Down button for 5 seconds to toggle unit of temperature display
Press and hold Up and Down button for 5 seconds
