5
Copyright. SAI HVAC 2021
V21.1
Figure 1
–
Select SAI-VAV network in
Wi-Fi settings
Figure 2
–
Enter the password
–
“
chatterbox
”
2. How to Connect to your System
There are three different methods for connecting to your system. The method you choose will depend on your
location and the type of installation you have in your building. Although you can connect to the inbuilt Wi-Fi
(see 2.1) a LAN connection is RECOMMENDED for optimal performance (see 2.2)
2.1 Direct Connection via Wi-Fi
NOTE: The service Wi-Fi is for use when commissioning your system and only when no LAN connection is
available. Some warranty terms are affected when connecting using this Wifi service solution.
Each VAV12 controls system can create its own network via Wi-Fi. This means you can connect your smart
device/computer to the system.
1. Open your Wi-Fi settings on your device and select the SAI VAV network
(Figure 1)
2. The Password is
“
chatterbox
”
(Figure 2)
3. Once connected to the controls network you can open your browser and browse to the system IP
address 192.168.2.11
4. You may wish to bookmark the page or add a link to your home screen on your device, so that you
can press the link instead of having to refer back to the IP address each time you wish to connect.
(Figure 5)
5. Direct connection requires your personal device/PC to be within range of the controls network. As
this range can vary significantly depending on building conditions, the preferred method of
connection is via a LAN as discussed in the following paragraph.
