background image

 

 

During the design and manufacture of the equipment, we have taken great care 

to reduce health and safety risks. 
Laying cables or installing ropes involves a variety of risks, and to reduce these it 

is important: 
-to study and follow the instructions 
-to train staff in maintenance and safety on an ongoing basis 
-to ensure that appropriate equipment and tools are available 
-that the owner and supervisor are responsible for ensuring that effective safety 

programmes and regulations are developed and followed by all staff 
Our instructions contain important information that all users should know and 

understand before they use the equipment. To ensure the safety of yourself and 

others, you should pay particular attention to the points/sections with following 

headings: 
 
 

Important information that warns you about the risk of serious personal injuries 

or danger of life if the instructions are not followed. 

Important information that describes how you should prevent damage to ma-

chinery and equipment or how to avoid a situation that can cause personal inju-

ry.

 

Advisory information regarding the operation, care and maintenance of machin-

ery and equipment. 
   

Summary of Contents for 7152 Series













Reviews: