Assembly step 5
To check patio heaters for leaks
To be performed in a well ventilated area. Lie heater down on the floor as shown
below. Confirm all control knobs are in the off position.Open the gas control valve on
the bottle or regulator.
Check for leaks by brushing a solution of 1/2 water and 1/2 soap over the gas
hose connections and regulator connection as shown.
NEVER USE AN OPEN FLAME
to test for leaks at any time.
If bubbles form over any of the joints, there is a leak. Turn off gas supply and
retighten all joints.
Repeat test. If bubbles form again, do not use the patio heater. Please contact your
local gas dealer for assistance or the helpline stated in this manual. Leak test
annually and whenever the gas bottle is removed or replaced.
Visit us at www.uig.biz
Assembly step 5
To check patio heaters for leaks
To be performed in a well ventilated area. Lie heater down on the floor as shown
below. Confirm all control knobs are in the off position.Open the gas control valve on
the bottle or regulator.
Check for leaks by brushing a solution of 1/2 water and 1/2 soap over the gas
hose connections and regulator connection as shown.
NEVER USE AN OPEN FLAME
to test for leaks at any time.
If bubbles form over any of the joints, there is a leak. Turn off gas supply and
retighten all joints.
Repeat test. If bubbles form again, do not use the patio heater. Please contact your
local gas dealer for assistance or the helpline stated in this manual. Leak test
annually and whenever the gas bottle is removed or replaced.
Visit us at www.uig.biz
