ENGLISH
12.3. Eliminating an obstruction
If the spray cap becomes blocked during operation, stop spraying immediately. Place the gun
safety lock. Then operate according to the following procedure:
Fixed tip
1.- Engage the gun safety. Open the compression valve of the gun.
2.- Remove the tip guard and nut.
3.- Extract the spray tip.
4.- Remove the obstruction by blowing with compressed air through the front of the spray cap.
Should this prove to be insuficient, clean the spray tip with the right cleaning solvent and use the
right tip cleaning solvent.
Note: Do not use metal or sharp objects for cleaning the cap.
Swivel tip
1.- Engage the gun safety.
2.- Turn the lever 180
o
(No. 1 - figure 8).
3.- Disengage the gun safety, tighten the gun trigger inside the grounded metal vessel pointing this
towards the sides of the vessel to remove the obstruction. Release the gun trigger.
Note: The metal vessel used to collect the product must be correctly grounded.
4.- Engage the safety once more. Turn the lever (no. 1 - figure 8) again 180º to the spray position.
5.- If the blockage persists, reengage the gun safety. Open the unit decompression valve.
6.- Loosen the nut which secures the tip. Remove the spray tip.
7.- Remove the obstruction by blowing with compressed air through the front of the spray tip.
Should this prove to be insuficient, clean the spray tip with the right cleaning solvent.
13. Lubrication
The original lubrication of the gun is eliminated through
use and cleaning. In order to guarantee perfect operation,
it is necessary to grease the regulating or fastening
threads, friction areas, etc., on a periodic basis, especially
after each cleaning session and with greater care if the gun
has been cleaned in a machine. Moving parts must be
lubricated lightly after cleaning has been completed.
We recommend you to use a light SAE 10 oil or natural
grease or vasoline.
It is important to check that the lubricant used does not
contain components that might impair the spraying quality
(Silicones, etc.)
Fig. 6
Fig. 7
Fig. 8
