Sagitter BLOK 2TW, User Manual

Page: 20 / 28

20
5. - SETUP
5.1 – MENU
MENU
ADDRESS
001 - 512 DMX address
MENU
CH. Mode
1px 1Ch / 1px 4Ch / 1px 6Ch / 2px 2Ch / 2px
6Ch / 2px 10Ch
DMX channels mode
MENU
PIXORDER
A (STD) / B (180) Eye switch ON order
MENU
CURVE
SQUARE / INV. SQ / S-CURV / LINEAR Dimmer curve
MENU
LOCKING
OFF / ON
Menu lock (PWD: UP-DOWN-UP-DOWN-
ENTER)
MENU
NO DMX
BLACKOUT / FREEZE Function after DMX fail
MENU
FAN
AUTO / SILENT Fan mode
MENU
TEMP
xxx F / xxx °C Temperature control
MENU
FACTORY
NO / YES Reset to factory defalut
MENU
FIRMWARE
xxxxxxx Firmware version
IMPORTANT NOTE: To rotate the display, press MODE and when the display shows the
main menu, press UP.
5.2
– MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
•
Link together all the units from the connector DMX OUT to DMX IN.
•
Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode.
•
Operate the Master unit in Automatic mode or Static mode to operate the entire system.
The entire chain of Slave unit will act as the Master unit
5.3 - DMX MODE
1 channel mode (1px)
Channel Value Function
1 000 – 255 White
2 channels mode (2px)
Channel Value Function
1 000 – 255 White 1
2 000 – 255 White 2