Sagitter ARROW300B, User Manual

Page: 4 / 25

PROEL GROUP BRAND
1.1 Safety Instructions
The ARROW300B is a High-Tech Product.To Guarantee a smooth
operation, it is necessary to respect the following rules. The
manufacturer ofthis device will not take responsibility of damages
through any disregard of theinformation in this manual. Warranty
claims also will be cancelled in case the system casing is opened.
1.Make sure before putting the system into operation, that the fan and the air inlets
are clean and not blocked by anything.
2.It must be assured that the system-head can rotate unhindered throughtout his
complete rotating range.A safety distance of at least 0.5 m to any easily inflammable
material(e.g.decoration material)must be adhered.
3. Attention! Don't touch the device during the operation. This can cause injuries
or damages.
4. The system doesn't contain any maintainable parts.Don't open it!
5.It is necessary to wait at least 15minutes after disconnecting the AC before changing
the optical carrier. Pay attention to possibly hot parts o f the system.
--Danger of BURNING--
6.
Never look directly into the beam of light.
Never use optical apertures with
a distance less than 0.5 m to observe the beam of light. You'll risk a serious injury of
your eyes and in particular of your retina.
7.To allow a secure operation,follow also the Installation guide described in chapter 2.
Operating the without suitable safety aids like safety cables or clamps/hooks can
increase the risk of an accident.
8.Repair, maintenance-and installation work shall be doneby qualified pay attention
to the common rules of technology that are not explicit mentioned in this manual.
9.Use only original spare parts.Any structural modification on the system will terminate
all warranty claims.
!!
4