5
3222180_GB
GENERAL INSTRUCTIONS ON DELIVERY
GENERAL WARNINGS
We assure you have made the best choice in purchasing our products and hope you will be fully satisfied
with our their performance. To this purpose, we recommend you strictly comply with the instructions and
regulations contained in this handbook..
The user is required to carefully read the manual, always referring to it and conserving it in a known place,
accessible to all authorised operators.
The equipment is destined only for the function for which it was designed and, being for professional use,
must be used only by qualified personnel.
The manufacturer declines all responsibility and any obligation to warranty if damage occurs to the
equipment, persons or things, imputable to incorrect installation, inappropriate use by untrained personnel,
non specific modifications or interventions, use of non original or non specific replacement parts, failure to
observe, even partially, the indications found in this manual.
Please remember that no reproductions of this handbook are allowed. Due to our constant technological
updating and research, the features described in this handbook may be altered without prior notice.
LIST OF REGUALATION REFERENCES
The cooling cabinet we manufacture fully complies with the following European and national regulations:
2006/42 (machine regulations)
2006/95 (low-voltage regulation)
2004/108 (EMC regulation)
97/23 (PED regulation)
93/68 (new approach regulation)
2002/95 (RoHS regulation)
2002/96 (RAEE regulation)
658/88 CEE
108/89 CEE
DPR 327/80 art.31 (Italy)
D.M. 15-06-71 (Italy)
D.L. n°110 27-01-92 (Italy)
J.O. 16-07-74 n°74-163 (France)
and the following European regulations:
EN55014-1;EN55104-2
EN61000-3-2 ; EN61000-3-3
EN60335-1;EN60335-2-89
EN378-I-II
TRASPORTATION AND HANDLING
For transportation and handling, all precautions necessary must be taken in order not to damage the
equipment, referring to the indications found on the packaging of the same.
Make sure that the consignment has not been tampered with or damaged during transport.
UNPACKING
Installation must be carried out by authorised and specialised personnel.
After removing the packaging, ensure the integrity of the equipment and verify that all
the parts or components are present and that the characteristics and state correspond
to the specifications of the your order.
If not, please inform the retailer immediately.
Remove pvc protective film from all over the appliance.
Attention:
all the packing material must be disposed of in accordance with the
prevailing regulations in the country where the equipment is used and in any case
must not be dispersed into the environment
.
