27
3222180_GB
STORED PROGRAMMES
These are 10 chilling cycles and 10 freezing cycles that can be configured based on the needs of the user,
the names of which can be freely set.
These cycles already have default settings set up by the manufacturer: once modified by the user the new
values can be saved in the memory and recalled at a subsequent start of that cycle.
10 of these programmes can be made FAVOURITES, organising them based on the needs of the user.
1.
Select MENU by rotating the knob
SOFT -18°C
HARD -18°C
IFR
INFINITY
SOFT +3°C
HARD +3°C
MENU
2.
Press the knob to enter section MENU
SOFT -18°C
HARD -18°C
IFR
INFINITY
SOFT +3°C
HARD +3°C
MENU
3.
Press the knob to enter section
STORED
AUTOMATIC
MULTY
COOLING
STORED
SETTING
SERVICE
HACCP
FUNCTIONS
MENU
4.
Press the knob to enter section
STORED
AUTOMATIC
MULTY
COOLING
STORED
SETTING
SERVICE
HACCP
FUNCTIONS
MENU
5.
Select the type of desired cycle by
rotating the knob
STORED +3°C
STORED -18°C
MENU
MEMO
6.
Press the knob to enter into the selected
type of cycle
STORED +3°C
STORED -18°C
MENU
MEMO
7.
Select the desired cycle by rotating the
knob
3
2 CICLO 2
CICLO 3
4 CICLO 4
1 CICLO 1
MENU
MEMO
MEMO +3°C
8.
Press the knob to activate the selected
cycle
During the cycle it is possible:
- View, modify the default parameters and make it
a favourite by selecting SET
- to stop the cycle by selecting STOP
Note: the modified parameters can be saved once
the new value is inserted by selecting
,
therwise, by selecting
, he modifications will
be active only for the cycle in progress.
If the modifications are saved the user will be
3
2 CICLO 2
CICLO 3
4 CICLO 4
1 CICLO 1
MENU
MEMO
MEMO +3°C
90'
CICLO 3
100%
+27°C
+24°C
SET
STOP
MEMO +3°C
