- 3 -
Welcome
We hope that you enjoy your new SageTracker, and that you
find it both practical and easy to use. SageTracker uses GPS
(Global Positioning System) to track its location and GSM
cellular service to send telemetry to the web-based tracking
server. Your report frequency will depend upon the service
option you have chosen. Your personal web account may be
accessed at www.sagetracker.com and holds your tracking
maps, reports, and other information for 120 days.
Getting Started
Your ST Personal was shipped ready to use. Simply install the
battery pack into the device and the device will power on. If
you are in an area with good visibility, the LED labeled “GPS”
should begin to flash within about 2 minutes. If you are using
either the AC or DC power adapter, connect the small USB
connecter into the device to provide auxiliary power.
LED Definitions
Power
Mode
CALL ON GPS
BAT
Yellow Yellow Yellow Red
Battery Blink
when
registering
Normally
Off
Slow Blink
Off when
no motion
detected
Blink when
locked
OFF when
no GPS
Slow blink
when
battery is
low
Auxiliary Same
ON
Solid Same
Fast
blink
during
charge.
Off when
charged
Take your device for a test run. We recommend that you make
a test run by placing the device directly on the dash of your
vehicle. Make sure that the GPS LED indicator is blinking. If it
is not, that is an indication that the unit has not been able to
- 4 -
sync up with the satellites. Move the device to as open a
location as possible.
GPS satellite signals are transmitted to varying degrees through
glass, fiberglass, plastics, and many other fabrics and
materials. SageTracker cannot “see” through metal.
SageTracker generally works well when placed in a glove
compartment, under the dash, or passenger seat of a vehicle
but it will not be able to obtain a new location fix if placed in
the trunk or under the hood.
Once you have made your test run, you are ready to view your
reports online. Go to www.sagetracker.com using an Internet
Explorer web browser. Click on the “My Site” button, and then
check to be sure that all pop up blockers have been disabled for
the tracking site. The maps and data tables are generated
using pop-up windows and will not display if you have not
disabled all pop-up blockers. You will also need to enable third
party cookies in order for the site to function correctly.
Once you have disabled the pop-up blockers, use the username
and password included to sign onto your account. To see your
tracks, select “Vehicles & Locations”. Click on “Today’s Track”,
and then click the “Show Me” button to bring up the map and
data report for your test run.
Initial Installation
User Buttons
ST Personal has five preprogrammed buttons that allow you to
change the reporting interval, set a geofences, or send an alert.
Button
Function
+
Set reporting interval to maximum
-
Set reporting interval to 10 minutes
Θ
Set 500ft/150meter radial geofence #1 at current
location. (Note. You must have a flashing GPS
LED in order for the unit to set a geofence)
<
Set radial geofence #2 at current location.
“Side”
Send alert message to tracking server
