RTI95 T2 HD UK
40
1.
Go to
>
Settings
>
Technical Settings
>
Video settings
.
2.
Select the settings best suited to your needs:
• Display
: select the display mode for your TV:
16/9
(widescreen TV),
4/3
(Traditional TV) or
Auto
(programme format will be respected -
16:9 or 4:3).
• HD Resolution
: If your TV set is connected to
the recorder with an HDMI cable, select the
resolution better suited to your HD TV set
(1080i, 720p or 576p). If you have a standard
TV set, set the resolution at 576p.
• Scart Output
: if you connected your TV to the recorder with a SCART cable, select
TV
mode. If
you connected a VCR/DVD recorder to the SCART connector, select
Recorder
mode.
In
TV
mode, audio volume changes and onscreen messages will be sent to the TV set. In
Recorder
mode, none of these operations are sent to the external recording device so that they
do not affect your recordings.
• Video standard
: select the video standard (PAL, RGB or S-Video) best suited for the TV/AUX
SCART output.
Setting the power parameters
1.
Go to
>
Settings
>
Technical Settings
>
Power Settings
.
2.
Select the settings best suited to your needs
• RF Loop-Through
: set this parameter to Yes if
you have a device connected to the RF loop-
through output of the box.
An RF loop-through is used to forward the raw
antenna signal coming into your receiver to
another TV or receiver.
• Aerial Power Amplification
: If you use an
active antenna with an amplifier and if you want
the recorder to supply it with power (5V power
voltage -50mA max.), set Aerial Power
Amplification to Yes. Otherwise, leave it on No.
• Sleep Timer
: you can set the recorder to automatically switch to standby mode after a specific
period of inactivity.
If you activate this feature, select the desired sleep time (from 1 hour to 12 hours).
LU 253463441-A RTI95 T2 HD UK.book Page 40 Mercredi, 1. février 2012 10:59 10