Appe
nd
ix
DTR94 HD freesat
41
11. Troubleshooting
WARNING
Never open the recorder, this can be dangerous.
Symptom
Action
The remote control is not working.
•
Point the remote control at the recorder.
•
Check the battery life and check the batteries are
inserted properly.
The recorder display shows no
information (no time, no channel
number, etc.).
•
Switch the recorder on by pressing the On/Off button.
•
Check all the connections (see
Connections
,
page 13).
The recorder displays - -: - - in
standby mode.
•
Take the recorder out of standby mode by pressing
the
key.
•
Check that the satellite signal is correctly detected
(see
Signal Information
, page 39).
The recorder displays a black
screen or an error message.
Search for programmes (see
Searching for channels
,
page 35).
The picture is frozen / unclear.
Check all the connections, check the antenna and
search for programmes again (see
Searching for
channels
, page 35).
The recorder cannot find any
channels.
•
Check the dish reception (see
Signal Information
,
page 39).
•
Search for programmes (see
Searching for
channels
, page 35).
•
Contact your satellite installer/dealer for more
information on your satellite dish installation and
alignment.
The TV set does not switch to the
recorder when it leaves standby
mode.
•
Check that your TV set is connected to the TV Scart
socket (see
Connection to the TV set
, page 14).
•
If necessary, select the Scart input directly on your
TV set.
There is no sound in HOME
CINEMA mode on some
channels.
Check that the recorder is connected to a HOME
CINEMA amplifier with a digital link (see
Connection to
a home cinema amplifier
, page 17).
Black and white video on AUX
output (during VCR/DVD
recording).
Check that the signal type chosen for AUX Scart output
is compatible with your VCR (select PAL on VCR, see
Audio and Video Output settings
, page 36).
UG 253443006-C DTR94 HD Freesat UK.book Page 41 Jeudi, 13. octobre 2011 11:25 11
