Sagem MYZ5, User Manual

Page: 10 / 83

10
Activating your phone
Installing the SIM card and the battery
The SIM card is inserted under the phone's battery. Ensure that the phone is
switched off and the charger disconnected.
Turn the phone back and press lock button to unblock cover.
Remove the back cover.
Take out battery if already installed.
Slide the SIM card, with cut corner as shown on the phone, into the card holder
with fold face down.
Place the battery by positioning first the top of it, as shown on the battery.
Replace the back cover by sliding it then push the lower part into the lock
position.
Getting started
You are now ready to use your phone for the first time.
Switch on the phone by pressing the
key. A short display appears.
When you switch on your phone for the first time, you must configure it with various settings that will remain by default until
you choose to modify them (depending on model).
After entering your PIN code and the date and time, make your choice for the following settings: time zone, daylight savings,
wallpaper, screensaver, ring tone, volume, vibrate and voicemail number.
If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.
2
1
3
5
4
1
2
3
4
5
252098290_myZ-5_en.book Page 10 Jeudi, 23. juin 2005 5:15 17