Two audio communication profiles are used by mobile phones: Headset profile and Hands-Free profile.
Some mobile phones support only one of them while others support both (for details refer to
www.sagem.com). The myCK100 handsfree kit has both profiles. When pairing a myCK100 handsfree
kit with a dual-profile mobile phone, Hands-Free profile is used by default. If you haven't started the
Bluetooth mode within 3 minutes, the myCK100 handsfree kit will switch off. You must then switch on
your handsfree kit and start the pairing again.
A very limited number of Bluetooth® mobile phones require a different pairing process to the one
explained above. If you encounter any difficulties pairing your handsfree kit with your mobile phone, visit
our website www.sagem.com or consult your dealer.
Installation
Fix the clip (3 clips can be provided) of the myCK100 handsfree kit on the sun visor.
Attach the myCK100 handsfree kit to the clip. The myCK100 handsfree kit must be placed wherein its
microphone is directed to the mouth of the user.
The position of the myCK100 handsfree kit microphone can vary according to the position of the sun
visor. Sagem recommends for an optimal communication quality to set the microphone hole in the
direction of the top casing or bottom casing. Others positions of the microphone will decrease the
communication quality.
.
Making a call with myCK100 handsfree kit
The voice recognition (or voice dialling) feature is not available on all mobile phones. However you can
always dial directly on your keypad. If your mobile phone offers the voice recognition feature, you can
make a call directly from the handsfree kit without any operation on your mobile phone.
Mobile phone with voice recognition
-
Make sure the voice recognition function on your mobile is activated and your voice tags have
been recorded with the phone.
-
Press the main push button
§
shortly (when there is no incoming and no active Call). The audio
connection is established.
-
Wait for the audio signal sent by the mobile phone (generally a short tone).
-
Speak out the name of person you wish to call, as stored in the phone voice tags. The mobile
phone will dial the stored number.
