Sagem MY411C, User Manual

Page: 44 / 69

44
Settings
Call waiting
(Operator-dependent service). During a call, you may be informed that a caller is trying to reach you: you hear a special tone.
The caller's identity is displayed on the screen (name or number).
You can
activate, deactivate, or status of the call waiting service in order to check if it is active or not.
During a call, if a second caller tries to contact you, the screen displays the call warning.
Auto redial
This menu allows you to call back a caller you have not managed to reach.
You can set the redial function to inactive, on request or systematic.
If you choose
On demand , your phone will offer to redial your caller automatically if his number is busy.
Blacklist
The blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications:
data, fax for example).
When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and no
automatic call will be done with this number any more until you delete it from the blacklist.
Note : this function does not apply to the calls performed manually.
Voicemail
This function is used to record your voicemail access number.
New number
After an incoming or outgoing call, SMS or MMS with a number not stored in the phonebook, this option allows you to activate
or deactivate a request to store the number in the phonebook.
Networks
This menu allows you to configure network preferences.
Choose
Selection to activate (automatically or manually) one of the networks accessible in the area in which your are located.
Choose Preferred to view all the pre-registered networks.
Choose Network type to select your network: GSM-DCS or PCS.
Choose GPRS to select the way you want to be attached on the GPRS network: always, or only when needed (when
launching a data connection).
253005562_LU_my411C_en.book Page 44 Jeudi, 27. septembre 2007 4:20 16