Sagem MY312X, User Manual

Page: 36 / 72

36
Settings
My Bluetooth
®
name
This is the name used to identify your phone when it is detected by another Bluetooth
®
device.
Pairing procedure
Select Paired devices/New Device .
If the Bluetooth
®
function is not active, the phone prompts you to activate it using one of the 3 modes described above.
The phone searches for visible Bluetooth
®
devices and displays the list. Select the device concerned and validate your
choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.
Enter and validate this code: Your phone is now paired with the remote device.
A connected device is shown in blue in the list.
[
Options ] on the name of a device lets you access the following options:
- Delete : this is used to delete the device. WARNING: using this function needs starting the pairing over again.
- Rename : this is used to modify the name of the device.
- Delete all : this is used to delete all your devices. WARNING: using this function needs starting the pairing over again.
- Activate : this is used to activate the connection with the device.
- Deactivate : this is used to deactivate the connection with the device.
- Properties : this is used to display the list of the device's Bluetooth
®
services.
Notes :
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
Car kit/Headset
This menu allows you to activate or deactivate the Automatic response option when the phone is connected to a pedestrian
kit or a car kit as well as setting the volume.
SyncML
Local : you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer. Use
the Wellphone software and configure your USB connection in your phone or activate Bluetooth
®
.