48
11. Other functions
The alarm function
is represented on
the screen by the
symbol .
Permanent flashing
of this symbol
indicates that an
alarm time has been
programmed but the
date and time clock
has not been
initialised.
11.2 Setting the alarm
To use your phone as an alarm
clock:
Using the numbers or the
scrolling arrows, set the alarm
time.
Press to go to the next item.
Set the minutes.
Tick the box and validate by
pressing
OK
.
The ringer is stopped by pressing any key;
the alarm remains programmed.
The alarm function remains active when the
phone is switched off. It is not affected by
silent mode.
11.3 Setting the timer
The same procedure is applied as for the
alarm function, but in this case you start a
time clock running against a defined value.
The phone must remain switched on.
11.4 Data parameters
You can set the serial link speed when using
AT commands.
MY_3078_EN-11.p65
05/03/02, 16:33
48
