7
EN
SWITCHING ON
C
HOOSING
THE
ADAPTOR
Choose the adaptor according to your country.
1.
Assemble the adaptor into the power transformer supplied.
S
WITCHING
ON
YOUR
RADIO
1.
Connect the power transformer supplied with your radio.
2.
Connect the power plug to the mains.
For the model
HM40
, the
icon indicates that your radio is
charging. The charge cycle is complete when the
icon is full.
USING THE RADIO DAILY
L
OCKING
/ U
NLOCKING
THE
RADIO
To carry your radio while it is on, place the
button on the right side of your radio in the raised
position. The control buttons are inactive.
P
OSITIONING
THE
FM/DAB
AERIAL
For optimal reception, extend the aerial. If necessary, move it to adjust the position.
S
WITCHING
FROM
FM
MODE
TO
DAB
MODE
Press the
key on the right side of your radio.
The screen displays the corresponding icon.
S
EARCHING
FOR
A
RADIO
STATION
I
N
FM
MODE
1.
Press the
key. The station search screen appears.
2.
Turn the knob to the right or left to scan the FM band.
The progression is displayed on the screen.
3.
At the end of the search, the radio broadcasts the station with the best signal.
Only use batteries, chargers and accessories approved for use with this model.
Connecting other accessories may be dangerous and void your warranty rights.
Before using your radio the first time, change it for 12 hours.
The battery will operate best after 3 to 4 charge cycles. As batteries have a limited
lifespan, standby or operating autonomy will diminish with use.
Keep the aerial away from any source of radiation to prevent interference (television,
video recorder, etc.).
The message
No signal - Start over
is displayed if the reception quality is insufficient
in DAB mode. Check the direction of the aerial.
To fine tune your scan, you can manually scan the FM band. For more details, see the
section
“Choosing the FM station search mode”
, page 10.
LU_HL40_HM40_EN.book Page 7 Lundi, 9. mai 2011 9:17 09
