3. Setting up Freesat
Step 1
– Switch on your TV
Step 2
– Switch on the Sagem box by pressing
the on/button
Step 3
– An initial installation screen will
appear Press
to start the installation
Step 4
– The receiver will search for the
satellite signal
Step 5
– Enter the full postcode (without any
spaces) using the alphanumeric keys on the
remote control for example to enter the letter
S, press the keypad number 7 four times
Use the
key to delete and correct
characters
Press
to continue
Step 6
– Follow the onscreen instructions
to personalise the box to your needs
Preferred Audio:
Select your audio language
TV screen size:
16:9 or 4:3
HDMI Resolution:
1080i, 576p or 720p
Parental code:
Set a parental control code
of your choice (default code is 0000)
Step 7
– The box will automatically start
searching for channels
1. Connecting the box
to the TV and the
Satellite Dish
Step 1
– Plug the satellite dish cable into the
SAT input connector on the back of the box
Step 2
– Plug the scart or HDMI cable into
the back of your box
Step 3
– Connect the scart or HDMI cable
into the back of your television
Step 4
– Connect the power cable into the
12V connector on the receiver and then plug
into the wall socket
2. Connecting to your Home
Cinema Equipment
Step 1 – Your Sagem freesat receiver can be
connected to your home cinema system. Use
the audio connections at the rear to connect
1
Step 1
2
Step 1
1
Step 2-3
1
Step 4
3
Step 2
On
3
Step 5
3
Step 6
Your box is now set up to start enjoying Freesat
9516 Easy-install_A5_leaflet_AW.indd 3-4
17/7/09 13:49:19
