89
S
ETTINGS
A screen prompts you to confirm the setting of the base to the registration
mode. Press
Yes
to enter the registration mode. The indicator light on
your base starts to quickly blink green.
You base will remain in registration mode for about 1 minute.
Resetting the base
When you reset your base, all the base parameters are reset to their initial
values (factory settings).
On the navigator key
, press or until the
Settings
screen is
displayed, press
OK
to confirm.
Select
Adv. Settings
using or . Press
Confirm
.
Select
Base Settings
using or . Press
Confirm
.
Select
Reset Base
using or . Press
Confirm
.
A confirmation screen will prompt you to confirm your request:
•
To reset the base, press
Yes
.
•
If you do not wish to reset the base, press
No
.
Enter the base code using the keypad. Press
Confirm
.
To exit the menu, press the red key
.
You can also use the base buttons to put the base in registration
mode: Press on the
button on the base for a few seconds.
When resetting the base, the base code becomes 0000 again.
LU D85C UK.book Page 89 Jeudi, 16. décembre 2004 5:30 17
