Sagem D70H, User Manual

Page: 42 / 194

6
G
ETTING STARTED
To use your SAGEM D70H hand set on the public telephone network from
your base, you must register and match it with a base compatible with the
European GAP standard.
Get the user brochure on the base to which you want to register, match
your SAGEM D70H hand set and find the paragraph concerning the
registering or matching of an additional hand set.
You have just put the batteries in your hand set and closed the flap. A
drawing of a three-colored flag is displayed on the screen.
On the navigator key , press OK.
The language selection screen is displayed. Press or until the
desired language is displayed. Validate with Confirm .
An installation guide is automatically launched. Two messages: "Auto
Help Guide for installation" and "Link your handset with base" are
consecutively displayed on the screen.
Then "Do you want to register handset ?" is displayed. Press Now .
To stop the procedure, press Later .
When the message "Press OK when your base will be in registering
mode" is displayed, turn your base to matching mode, then from the
navigateur , press OK.
"Handset in registration mode..." is displayed on the screen to tell you
that the base search procedure has started.
At the end of the procedure, the message "Handset registered" is
displayed on the screen.
?
C/OK ?
OK
Français
Return Confirm
English
Language
Deutsch
Later Now
Do you want to
register
handset ?
R
Press OK
when your base
will be in
registering mode
Exit
Handset in
registration mode
...
Handset
registered
G
ETTING STARTED
Livre du MD+.book Page 6 Mardi, 9. septembre 2003 5:04 17