18
B
ASE
SETTINGS
B
ASE
SETTINGS
Modifying the default base ring
volume
On the navigator key
, press
or
until
the BASE SET screen is displayed, press
OK to confirm.
Select RING VOLUME using
or
. Press
OK.
Press
or
to increase or decrease the
default volume. Once the volume is set,
press OK.
To exit the menu, press the red key
.
Modifying the base ringtone
This menu enables you to associate a
ringtone to incoming calls and internal calls
(intercom).
On the navigator key
, press
or
until
the BASE SET screen is displayed, press
OK to confirm.
Select RINGTONE using
or
. Press OK.
Select the desired ringtone using
or
.
Press OK.
To exit the menu, press the red key
.
Modifying the flash duration
(R key)
If you connect your telephone to a private
automatic branch exchange or use it in a
foreign country, you may need to modify the
flash duration in order to use your telephone
correctly.
Contact your service provider to obtain the
correct flash duration and then modify it by
doing the following. Five preprogrammed
durations are proposed on the list, the
correspondence between the number of the
list and the duration is the following :
On the navigator key
, press
or
until
the BASE SET screen is displayed, press
OK to confirm.
Select FLASH DURA using
or
. Press
OK.
An information screen presents the current
flash duration.
•
To keep the same time, press C key.
•
To modify the time, press OK. Select the
new flash time using
or
. Press OK.
To exit the menu, press the red key
.
number
corresponding
duration
1
80 ms
2
100 ms
3
180 ms
4
300 ms
5
600 ms
LU 251619615_D20T_GB_SAGEM.book Page 18 Jeudi, 26. août 2004 4:54 16
